The 110 Series features a dripless edge, is 22-1/8" overall depth, and includes integral 4-3/4" Backsplash and separate sidesplash cavity.

110 Dripless ALLxsection330
110 Dripless profile 125
 

Available in the lengths up to 146" shown below, or use divider bars to produce shorter length castings:

 110 3

Length/Description/Part Number

110 Series Molds

Ordering Note: The molds listed below include a standard (heavier) gate. You may order each mold with a lightweight (easier handling) by adding a "3" to the end of each of the mold part numbers listed below.

25" - 110-NB-25 Dripless Edge 22"D x 25"L, Boxed - #20501
31” - 110-NB-31 Dripless Edge 22"D x 31"L, Boxed - #20502
37” - 110-NB-37 Dripless Edge 22"D x 37"L, Boxed - #20503
43” - 110-NB-37 Dripless Edge 22"D x 43"L, Boxed - #20504
49” - 110-NB-37 Dripless Edge 22"D x 49"L, Boxed - #20505
61” - 110-NB-37 Dripless Edge 22"D x 61"L, Crated C-100 - #20506
73” - 110-NB-37 Dripless Edge 22"D x 73"L, Crated C-100 - #20507
96” - 110-NB-96 Dripless Edge 22"D x 96"L, Crated C-100 - #20509
124” - 110-NB-124 Dripless Edge 22"D x 124"L, Crated C-100 - #20512
146” - 110-NB-146 Dripless Edge 22"D x 146"L, Crated C-100 - #20515
146” - 110-NB-146 Dripless Edge 22"D x 146"L, with 6-Cavity Splash, Crated C-100 - #205155
 

Options:

End Splash Molds (when ordering, append an M for Metamold, or a V for Vinyl Ester mold construction to the part number shown below).
160-2, 4" x 21" 12-Cavity (6 Right, 6 Left Sides) - #22702*
160-2, 4" x 21" 2-Cavity (1 Right, 1 Left Side) - #227021*

Dividers
Yellow Divider 110 x 1/2" - #010751
Black Divider 110 x 1/2" - #010751R
Yellow Divider 110 x 1-1/4" - #010752
Black Divider 110 x 1-1/4" - #010752R
Yellow Divider 110 EZ Fit with Grin (1-1/4” with 3/4” at ends) - #010754
 
Mold Track:
For 25" mold (#20501) - order #OP051
For 31” mold (#20502) - order #OP052
For 37" mold (#20503) - order #OP053
For 43” mold (#20504) - order #OP054
For 49” mold (#20505) - order #OP055
For 61" mold (#20506) - order #OP056
For 73” mold (#20507) - order #OP057
For 96” mold (#20509) - order #OP059
For 124” mold (#20512) - order #OP061
For 146” mold (#20515 or #205155) - order #OP061

Before you Order a Mold:

  • Mold Construction Choice (Metamold or Vinyl Ester) - All molds can be ordered in our premium Metamold gelcoat, or more affordable Vinyl Ester gelcoat finishes. To order as Metamold, add an M to the end of the order numbers provided. To order as a Vinyl Ester version, add a V to the end of the number.

  • Female Mold Options - Most molds require a female mold or mold alternative. Learn about the types and differences here.

  • Mold Break-in Instructions - Gruber molds are preconditioned for your convenience. Learn how you should break in your new Gruber Mold.

  • Mold Track Option - Order your Gruber mold with Mold Track to easily move your molds through your production line