Mold Supplies and Accessories

From Gruber Systems and Marshall Gruber Company
Black (Reinforced) End Stop Divider Bars

Black Divider Bars are reinforced for added rigidity compared to Yellow End Stop Divider Bars. Black bars provide additional stiffness, and are less prone to warpage due to the pressure exerted by the matrix during casting.

These reusable black dividers are indispensable for custom set-ups where cove-back or integral backsplash molds are involved. Designed to fit the contours of a specific cove-back mold, End-Stop Dividers are used to establish the end boundaries for custom tops and are composed of a urethane material that provides a more finished edge on the part.

Note: The order number below lists the No Bowl Deck series (ie. 110 Dripless Edge Series), and additional information to identify the divider. When ordering, indicate the specific mold series number (straight or dripless) or mold part number that the divider will be used. For assistance, contact your Gruber representative. Sold individually.

Note: All Black (reinforced) divider bar part numbers end in an R. Yellow Dividers are the same part number, but without the R in the part number.

Part Number and Description

#010714R - 139 Texas OG Double Edge 22"

#0107453R - 625 Bullnose Right 1-3/8"

#0107454R - 625 Bullnose Left 1-3/8"

#010671R - 138 OG Right 25"

#010672R - 138 OG Left 25"

#010673R - 138 Double Sided OG 25"

#0106805R - 524 1-1/2" Full Step Down Bullnose

#0106815R - 524 1-1/2" Full Step Down Right Bullnose

#010681R - 524 1-3/8" Step Down Right

#0106825R - 254 1-1/2" Full Step Down Left

#010682R - 524 1-3/8" Step Down Left

#01068R - 524 1-1/2" Step Down Straight

#010701R - 139 Texas OG 30 Double Sided

#010702R - 139 Texas OG 30" Right

#010703R - 139 Texas OG 30" Left

#010713R - 139 OG Front

#010712R - 138 OG Front

#01071R - 138 OG Right

#010721R - 138 Double Sided (Left/Right) OG

#010722BR - 139 Double Texas OG 22"

#01072R - 138 OG Left Hand

#010725R - 139 Texas OG 1" x 144"

#010732R - 523 Bullnose - Closed End Right

#010733R - 523 Bullnose End - Closed End Left

#010740R - 625 - 2" Bullnose Right

#0107450R - 625 1-1/2" Bullnose

#010751R - 110 Straight - 110 x 1/2"

#010752R - 110 Straight 1-1/4"

#010773R - 111 Straight 1-1/4"

#010774R - 111 Straight 1/2"

#010776R - 111 Straight 1"

#010777R - 111 Straight 23

#01078R - 119 Straight

#01079R - 119 Straight - for 119-NB-120

#010805R - 128 Straight

#01080R - 125 Straight

#01082R - 219 Straight

#01083R - 230 Straight

#010835R - 230 Straight - 1-1/2" Custom

#01087R - 340 Straight

#01097R - 111 Chamfer - for 111-NB-146

#010992R - 111 Straight - for 25" Depth 111-NB-146

#010993R - 522 Straight, 522-146 Close End

#010995R - 522 Bullnose 1-3/8"

#0109951R - 522 Bullnose 1-1/2", full 1-1/2" thick divider

#010996R - 522 Bullnose for 146 Bullnose Banjo. Front Bullnose Only. Straight Sides (for short side Banjo)

#010997R - 522 Bullnose 1-1/2" Right 522RGT

#010998R - 522 Bullnose 1-1/2" Left

#010999R - 111 Straight 22-5/8" x 3/4" tall

#0109991R - 111 Straight 22-5/8" x 1-1/2" tall

#011003R - 525 Bullnose 1-1/2" 25"D

#011005R - 625 2" Bullnose Right

#011006R - 625 Bullnose 2" Bullnose Left

#011008R - 525 Bullnose Left

#011009R - 525 Bullnose Right

#01117R - 111 Radius Right

#01118R - 111 Radius Left

#01120R - 540 Straight for 540-NB-146

#011282R - Rope Deck Left

#011283R - Rope Deck Right

#01133R - 111 Chamfer Right Hand

#01134R - 111 Chamfer Left Hand

#011391R - 522 Banjo Arm Left

#011392R - 522 Banjo Arm Right

#011395R - Rope, Straight (#20876)

#011405R - 138 Drop OG Left

#011406R - 138 Drop OG Right

#011407R - 138 Drop OG Front

 


End Stop Divider Bars for Sill Molds and Corniced Sill Molds:

180-18 Series are special End-Stop Dividers for blocking the a sill mold or corniced sill mold down to any desired length. Since the molds are available in a variety of lengths for the various sill mold depths. These End Stop Dividers are ordered based on the depth of the mold - either 5", 10", 12" or 24". For any corniced sill mold divider deeper than 24", please contact your Gruber representative.

#010865R - Divider, Black (Reinforced) 180-18/5 - for 5" deep Corniced Sill Molds (#228185 and #2281851)

#01086R - Divider, Black (Reinforced) 180-18/10 - for 10" deep Corniced Sill Molds (#228181, #22818, #228180, #228182, and #228183)

#010862R - Divider, Black (Reinforced) 180-18/12 - for 12" deep Corniced Sill Mold (#22874)

#010861R - Divider, Black (Reinforced) 180-18/24 - for 24" deep Corniced Sill Mold (#22873)