Key Features:
We use the toughest, easiest rolling wheelways made - each heavy-duty, 2” ball bearing wheel is rated at a 100 lb capacity for long life and low maintenance.
The superior strength of the wheelway channel allows support legs to be spaced up to 10’ apart, a real savings on installations.
Conveyors are available in two standard heights - 32” height for regular sized molds, or 24” for larger tub and panel molds.
Each support leg rests on a 6” adjustable “foot” for leveling on uneven floors.
All conveyor lines are assembled with bolt-together construction for easy line expansion and/or relocation.
Mold stops included on the drop ends of all lines allow molds to roll onto the wheelways, but stop molds from rolling off the end of the line. Mold stops are provided for both ends of multi-level lines.
The length and width of Gruber Conveyor lines as well as the configuration of multi-line and/or multi-level systems are determined by the customer’s production needs
Gruber’s engineers design, build, and install mold handling conveyor systems to meet a customer’s specific facility, production, and budget requirements. Call today for a quote, or for a consultation!
Gelcoat Conveyors are used to transfer molds into Spray Booths for application of Gelcoat prior to casting.
Multi-Level Skate Wheel Mold Conveyors are essential production line equipment, and are used to easily transfer molds throughout the plant. They provide exceptional flexibility in routing your molds through the shop. These multi-level conveyors also are useful as mold storage, and can be configured as either "in-line" with your multi-level skate wheel conveyors, or as a free-standing 12' Mold Storage System.
Multi-Level Skate Wheel Conveyors are available in a number of levels - from 1 level up to eight levels. Generally however, from 1 to 5 levels is most common.
Generally, Multi-Level Conveyors are configured in 10' (foot) sections, starting with a "Complete" module, then "adding" additional 10' length sections to that initial complete unit as needed to create the full length required. In addition, either 5' sections or 12' sections are also available to create the exact length run you need for any application.
The A11 Double-Wide Skate Wheel Conveyor system provides a convenient and uniform way to move molds throughout your manufacturing process around the entire factory. Excellent for handling very large panel and tub molds.
The A8 skate wheel conveyor systems provide a convenient and uniform way to prep and clean molds in your setup and cleaning areas, throughout the entire manufacturing process.
The F8 Skate Wheel Finishing Conveyor was designed to provide an effortless way of moving finished castings (especially cast bowls) - to the final finishing work areas.