Clay/Wax Extruder Parts
Clay and Wax Tooling Extruders are subject to heavy use and over time, may require some replacement parts. Refer to the Extruder Parts Lists below to find a replacement part for your Gruber Clay/Wax Extruder:
Download an exploded drawing and parts list below, or refer to the exploded view drawing below:
Click on image for larger version
Note: The Chrome Cylinder from the Pneumatic Extruder will NOT fit on the Manual Clay/Wax Extruder.
Parts List
|
Diagram
Reference #
|
Part Number | Description | Qty |
|
1
|
100006
|
Long Handle Ratchet
|
1
|
|
2
|
100007
|
Chrome Clay Cylinder
|
1
|
|
3
|
100008
|
Rack Gear
|
1
|
|
4
|
100009
|
Pinion Gear/Shaft Assembly
|
1
|
|
5
|
100010
|
Pinion Gear
|
1
|
|
6
|
1000100
|
Pinion Gear Shaft with Key
|
1
|
|
7
|
100011
|
Side Plate / Rack and Pinion
|
1
|
|
8
|
100012
|
Nozzle Set (3) - one each of the following: 1/8", 3/16", and 1/4". See note below.
|
3
|
|
9
|
100013
|
Light Bulb
|
1
|
|
10
|
100014
|
Socket/Cord Assembly
|
1
|
|
11
|
100015
|
Polyethylene Scraper
|
1
|
|
12
|
100016
|
Teflon Washers (2)
|
2
|
|
13
|
1000160
|
Screws for Side Plate and Light Socket (5)
10 - 24 x 1/2" Flat Head Machine Screws
|
5
|
|
14
|
1000161
|
Screw for Polyethylene Scraper (1) -1/4" - 20 x 1/2" Flat Head Machine Screw
|
1
|
Note:The nozzles shown below are included as a kit (PN 100012) including one of each of the ones shown below - one with a 1/8" orifice (shown at left below), one with a 3/16" orifice (shown at center below), and one with a 1/4" orifice (ahown at right below). Additional nozzles can be ordered individually. Contact Gruber Systems for assistance.
Shown above:
- 1/8" orifice (at left)
- 3/16" orifice (at center)
- 1/4" orifice (at right)
Pneumatic Clay Extruders include a variety of parts that may wear over time with continued use, and may require replacement.
Download the following, or refer to the exploded view drawing below:
Click on image for larger version
Note: The Chrome Clay Cylinder from the Pneumatic Extruder will NOT fit on the Manual Clay Extruder.
Parts List
|
Drawing
Reference Number
|
Part Number | Description | Quantity |
| 1 | 100019 | ARO 224C Push Button Valve | 3 |
| 2 | 163593 | Brass PTC Tube, 1/4" Tube OD X 1/4" NPTF Male Pipe | 4 |
| 3 | 100023 | Bushing, Bross 1/4 x 3/8 209P-6-4 | 2 |
| 4 | 100018 | Pneumatic Cylinder 4D X 6, with Cylinder Pin and Retaining Clips - for Pneumatic Clay Extruders | 1 |
| 5 | 166803 | SWVL 90Deg Elbow for 1/4 Tube OD X 3/8 NPTF | 1 |
| 6 | 0830888 | Coupling, Brass 3/8" FNPT | 1 |
| 7 | 163808 | Polybutylene & Bross push to connect Fitting Tee for 1/4" Tube OD, Black (Air Fitting} | 1 |
| 8 | 100012 | Nozzles (Set of 3} - one each (1/8", 3/16", 1/4" orifice ID openings} | 1 |
| 9 | 1000171 | Frame,Clay Extruder Pneumatic | 1 |
| 10 | 165429 | Steel Phillips Rounded Head Screws 6-32 Thread Size, 1/2" Long | 2 |
| 11 | 1000210 | Screw, SHCS, 10-24 x 1/4 | 10 |
| 12 | 1000214 | Clay Extruder Tube, Pneumatic | 1 |
| 13 | 1000213 | Screw ·FH SOC, 7/16-20xl.75 | 1 |
| 14 | 100021 | Teflon Scraper | 1 |
| 15 | 163596 | Brass Push-To-Connect Tube Fitting Swivel 90 Deg Elbow for 1/4" OD Tube x 1/4" NPTF Male | 4 |
| 16 | 100020 | Pneumatic Clay Extruder Metal Enclosure | 1 |
Note:The nozzles shown below are included as a kit (PN 100012) including one of each of the ones shown below - one with a 1/8" orifice (shown at left below), one with a 3/16" orifice (shown at center below), and one with a 1/4" orifice (ahown at right below). Additional nozzles can be ordered individually. Contact Gruber Systems for assistance.
Shown above:
- 1/8" orifice (at left)
- 3/16" orifice (at center)
- 1/4" orifice (at right)
Repair Kits
A variety of replacement parts kits are available to maintain your pneumatic extruder:
- Piston Seal Kit, 4.2MA - #100018-R1
- Seal Kit, Gland - #100018-R2
- Replacement Teflon Scraper - #100021
