Mold Supplies and Accessories

From Gruber Systems and Marshall Gruber Company
Yellow End Stop Divider Bars

Yellow End Stop Divider Bars are unreinforced, and are a less expensive alternative to the generally superior reinforced Black End Stop Divider Bars.

These reusable yellow dividers are indispensable for custom set-ups where cove-back or integral backsplash molds are involved. End-Stop Dividers are designed to fit the contours of a specific cove-back mold, and are used to establish the end boundaries for custom tops and are composed of a urethane material that provides a more finished edge on the part.

Note: The order number below lists the No Bowl Deck series (ie. 110 Dripless Edge Series), and additional information to identify the divider. When ordering, indicate the specific mold series number (ie. 110, 111, etc), plus the edge style (ie. straight, dripless, chamfer, etc.) or mold part number that the divider will be used. For assistance, contact your Gruber representative. Sold individually.

Note: Black (reinforced) divider bar part numbers are the same as part number as shown below, but includes an R at the end of the part number.


Part Number and Description

#010751 - 110 Dripless 1/2"
#010752 - 110 Straight 1-1/4"
#010754 - 110 Dripless EZ Fit with "Grin" (11-1/4" with 3/4" at ends)
#010771 - 111 Straight 15/16"
#010772 - 111 Straight
#010773 - 111 Straight 111 x 1-1/4"
#010999 - 111 Straight 22-5/8" x 3/4" tall
#0109991 - 111 Straight 22-5/8" x 1-1/2" tall
#010774 - 111 Straight 1/2"
#010777 - 111 Straight 23"
#01097 - 111 Chamfer for 111-NB-146 Chamfer
#01133 - 111 Chamfer Right Hand
#01134 - 111 Chamfer Left Hand
#01078 - 119 Straight
#010805 - 128 Straight
#010806 - 129 Straight
#01064 - 137 OG 120" x 1/4"
#01067 - 138 OG Front 25"
#01071 - 138 OG Right Hand
#01072 - 138 OG Left Hand
#010671 - 138 OG Right 25"
#010672 - 138 OG Left 25"
#010673 - 138 OG Double (Left/Right) 25"
#010712 - 138 OG Front
#010721 - 138 OG Double (Left/Right)
#010723 - 138 OG 144" x 1/4"
#010724 - 138 OG 144" x 1"
#010725 - 139 OG 144" x 1"
#010755 - 219 Straight EZ-Fit
#010756 - 219 Straight 146 EZ-Fit with Grin
#010892 - 219 Straight
#01062 - 223 Straight
#01083 - 230 Straight
#010835 - 230 Straight 1-1/2" Custom
#010993 - 522 Bullnose 146 Bullnose Closed End
#010994 - 522 Bullnose 146 Bullnose Closed End
#010995 - 522 Bullnose 1-3/8"
#010996 - 522 Bullnose for 146 Bullnose Banjo. Front Bullnose only. Straight sides (for short side Banjo)
#010997 - 522 Bullnose 1-3/8" Right
#010998 - 522 Bullnose 1-3/8" Left
#010732 - 523 Bullnose Closed End Right
#010733 - 523 Bullnose Closed End Left
#011003 - 525 Bullnose 1-1/2" x 25"
#01120 - 540 Straight 3/4"
#011203 - 540 Bluntnose 1-1/2"
#0107450 - 625 1-3/8" Bullnose
#0107453 - 625 1-3/8" Bullnose Right
#0107454 - 625 1-3/8" Bullnose Left
#010740 - 625 Bullnose 2"
#0107450 - 625 Bullnose 2"
#010744 - 630 Bullnose 2"
#010745 - 636 Bullnose 2"
#0107452 - 642 Bullnose 1-3/8"
 

End Stop Divider Bars for Sill Molds and Corniced Sill Molds:

180-18 Series are special End-Stop Dividers for blocking the a sill mold or corniced sill mold down to any desired length. Since the molds are available in a variety of depths, these End Stop Dividers are ordered based on the depth of the mold - either 5", 10", 12" or 24". For any corniced sill mold divider deeper than 24", please contact your Gruber representative.

#010865 - Divider, Yellow (Unreinforced) 180-18/5 - for 5" deep Corniced Sill Molds (#228185 and #2281851)

#01086 - Divider, Yellow (Unreinforced) 180-18/10 - for 10" deep Corniced Sill Molds (#228181, #22818, #228180, #228182, and #228183)

#010862 - Divider, Yellow (Unreinforced) 180-18/12 - for 12" deep Corniced Sill Mold (#22874)

#010861 - Divider, Yellow (Unreinforced) 180-18/24 - for 24" deep Corniced Sill Mold (#22873)