Autocaster FAQs

Autocaster FAQs (0)

Learn more about Autocaster™ series of continuous casting systems to automate production of polymer matrix for cast polymer manufacturing.

How Do I Adjust the Catalyst Pressure Sensor in my Autocaster? (0)
Why Am I Getting Intermittent Connection Errors and #### for Number Displays? (0)
How Do I Replace the Eaton (Cutler-Hammer) Overload on the RhinoCaster with the Carlo Gavazzi version? (0)
How Do I Retrofit My Old Catalyst Pump to the New Style Pump? (0)
How to assemble an Autocaster Resin Pump or Base Color Pump (0)
Replace or Adjust an Autocaster Main Auger (0)
Measure Current on a Siemens G110 Inverter (0)
How Do I Replace my Norgren Solenoid with a SMC Solenoid? (0)
How Do I Replace a 2-Wire Sensor with a 3- or 4-Wire Sensor in an Autocaster? (0)
What Do The Recipe Percentages Represent on an Autocaster? (0)
How Do I Recalibrate the Touch on a MP37x Screen? (0)
Programming the Temperature Controller in my Autocaster Basic machine (0)
How Do I Determine The Correct Drive Factor in my Autocaster? (0)
How Do I Replace a Siemens Inverter With a Yaskawa Inverter? (0)
How to use the Autocaster Veining Injectors (0)
Autocaster Shutting Down or Alarming of an Overpressure (0)
How Do I Obtain the best Vacuum Performance with my Vacuum Autocaster? (0)
Why Won't The Machine Reset After a Serious Alarm? (0)
Keep Getting a Catalyst Flow Disturbance Warning Message (0)
How do I Calibrate a Flow Sensor in my Autocaster? (0)
Recommended Gear Oil for Baldor Gear Reducers (0)
How Do I Setup the Resin Pressure Sensor in my Autocaster? (0)
Repair Autocaster Check Valve (0)
Clean an Autocaster Heat Exchanger (0)
Replace Autocaster PLC Battery (0)
How Do I Resolve Base Color Flow Issues in my Autocaster? (0)
Effects of using Lightweight Filler with an Autocaster (0)
Wear Signs of an Autocaster Base Color Pump (0)
Not getting the Correct Amount of Resin or Filler in my Autocaster (0)
Heater Not Heating Resin in Autocaster (0)
What Type of O-Ring Material Should I Use in my Autocaster? (0)
How Do I Troubleshoot Resin Heating Problems? (0)
How to Enter a Recipe on the Autocaster RC (0)
Controlling Autocaster Resin Temperature (0)
Clear Clogged Veining Injectors (0)
Mixing Auger Variable Speed Adjustment (0)
Measure Siemens MM420 Inverter Electrical Current (0)
Change Siemens MM320 Inverter Drive Parameters (0)
How to Calibrate an Autocaster (0)
Determining proper Autocaster Auger/Pump/Gearbox Sizes (0)
Heat Exchanger Plate Gap for Autocaster (0)
Autocaster System Setting Protection (0)
Shutting Down an Autocaster for an extended period of time (0)
Replacing an Eaton – Cutler Hammer Inverter Motor drive with a Yaskawa J1000 Motor Drive (0)
Top Mount Ground Hopper Setup (0)
Setting up a Printer on an Autocaster Touchscreen (0)
Batchmaster FAQs

Batchmaster FAQs (0)

The Batchmaster™ Metering System automates batch mixing with recipe control batch matrix production.

Assemble a Resin/Base Color Pump in a Batchmaster? (0)
How Do I Replace a 2-Wire Sensor with a 3- or 4-Wire Sensor on a Batchmaster? (0)
How Do I Program The Temperature Controller in my Batchmaster? (0)
Why Is My Machine Shutting Down or Alarming That It is Overpressure in my Batchmaster? (0)
Recommended Gear Oil for Baldor Gear Reducers (0)
What Type of O-Ring Material Should I Use in my Batchmaster? (0)
How Do I Adjust the Catalyst Pressure Sensor in my Batchmaster? (0)
How Do I Setup the Resin Pressure Sensor in my Batchmaster III? (0)
How Do I Repair a Check Valve in my Batchmaster? (0)
How Do I Clean the Heat Exchanger in my Batchmaster? (0)
How Do I Replace The PLC Battery in my Batchmaster? (0)
How Do I Resolve Base Color Flow Issues in my Batchmaster? (0)
How Do I Stop The Resin Nozzle from Dripping? (0)
Improve Batchmaster III Base Color Reliability (0)
Calibrate the Batchmaster Flow Sensor (0)
Using a Lightweight Filler with a Batchmaster? (0)
Signs Of Wear on a Batchmaster Base Color Pump? (0)
Signs of Wear on a Batchmaster OLFD Base Color Pump? (0)
Incorrect Amount of Resin/Filler when using Batchmaster? (0)
Batchmaster Heater Not Heating Correctly (0)
How to Calibrate a Batchmaster III (0)
Initial Setup of a Batchmaster III Scale (0)
Protecting Batchmaster System Settings (0)
What Do The Recipe Percentages Represent on a Batchmaster? (0)
Batchmaster Calibration will not work (0)
Grind Booth FAQs

Grind Booth FAQs (0)

This innovative Gruber Grind Booth incorporates the latest technologies in cast polymer manufacturing.

Does a Grind Booth ventilate to the outside of the building? (0)
Does the Grind Booth filters include HEPA filters? (0)
Do you provide turn-key purchase or installation services? (0)
How do I know how many Dust Collection Modules I require for a Grind Booth? (0)
Can you provide a Grind Booth with conveyor access through one or both sides of the booth, to allow a conveyor line to run into or through the booth? (0)
How much volume of compressed air do I need to supply, and what is the minimum required psi of that air flow? (0)
Blender/Mixer FAQs

Blender/Mixer FAQs (0)

Batch production of cultured marble and cultured onyx matrix or evacuate air from solid surface matrix with Gruber Systems' Blenders and Vacuum Mixers.

What Type of O-Ring Material Should I Use in my Gruber Vacuum Mixer or Blender? (0)
Recommended Gear Oil for Baldor Gear Reducers (0)
Conveyor FAQs

Conveyor FAQs (0)

Simplify movement of molds and castings through the production process with Gruber Conveyors.

Recommended Gear Oil for Baldor Gear Reducers (0)
Casting Cart FAQs

Casting Cart FAQs (0)

Simplify movement of molds and castings through the production process with Gruber Casting Carts.

Recommended Gear Oil for Baldor Gear Reducers (0)
What Hydraulic Fluid do I use for my Hi-Boy Exchange Cart? (0)
Gruber Tech Tips

Gruber Tech Tips (0)

These "Tech Tips" are provided by Steve Miller, Sales Representative for Gruber Systems via periodic email as a courtesy to Gruber Systems customers. To receive these emails, or to contact Steve, please click here.

 

 

 

Gruber Tech Tip: Autocaster and Batchmaster Shut Down Procedures (0)
Gruber Tech Tip: Volumetric Metering on Autocaster (0)
Gruber Tech Tip: Adapting Machines For Hard To Handle Fillers (0)
Gruber Tech Tip: Baldor Gearboxes No Longer Available (0)
Gruber Tech Tip: 350 LB Blender Gearbox Change (0)
Gruber Tech Tip: Bowl Demolding Techniques (0)
Gruber Tech Tip: Cartridge Type Grinding Booth For Cast Polymer Applications (0)
Gruber Tech Tip: How Lightweight Fillers Affect Recipes (0)
Gruber Tech Tip: Display Touchscreen Replacement On Gruber Equipment (0)
Gruber Tech Tip: How To Adjust The Temperature Controller On A Batchmaster (0)
Gruber Tech Tip: How To Adjust Veining On The Autocaster™ Economizer and Ultra Casting Machines (0)
Gruber Tech Tip: Heat Exchangers - the Types, Cleaning/Repair and Upgrades (0)
Gruber Tech Tip: Catalyst System Issues & Fixes (0)
Gruber Tech Tip: Refurbish Your Batchmaster II Batching Machine (0)
Gruber Tech Tip: Casting Cart Options (0)
Gruber Tech Tip: Base Color Issues and Fixes (0)
Gruber Tech Tip: PLC Batteries and Replacement (0)
Gruber Tech Tip: Removal and Installation of Heat Exchanger Plate Set (0)
Gruber Tech Tip: Expandable Heat Exchanger Construction (0)

These frequently asked questions form a knowledge base of information that Gruber Equipment operators and maintenance personnel can easily refer to.